本文へスキップ

プラズマエネルギーシステム研究室

豊橋技術科学大学

電気・電子情報工学系

滝川・須田研究室

研究論文 研究論文リスト 全て(ALL)












Updated August 20, 2015
 自然エネルギー、エコエネルギー関連はこちら                                   --- Top pages (1st pages) are available in PDF. ---
 195. "Second by second prediction of solar power generation based on cloud shadow behavior estimation near a power station"
R. Nomura, T, Harigai, Y. Suda, H, Takikawa
AIP Conference Proceedings, 1807, pp.020024_1-10(2017.1), doi:http://dx.doi.org/10.1063/1.4974806
 194. "Influences of internal resistance and specific surface area of electrode materials on characteristics of electric double layer capacitors"
Y. Suda, A. Mizutani, T. Harigai, H. Takikawa, H. Ue
AIP Conference Proceedings, 1807, 020022(2017.7.1), doi:http://dx.doi.org/10.1063/1.4974804
 193. “Dry machining of metal using an engraving cutter coated with a droplet-free ta-C film prepared via a T-shape filtered arc deposition”
Y. Fujii, T. Imai, Y. Miyamoto, N. Ueda, M. Hosoo, T. Harigai, Y. Suda, H. Takikawa, H. Tanoue, M. Kamiya, M. Taki, Y. Hasegawa, N. Tsuji, S. Kanekoe
Surface and Coatings Technology, Vol.307-B, pp.1029-1033 (2016.12), doi:http://dx.doi.org/10.1016/j.surfcoat.2016.07.037
 192. “Nanopore formation process in artificial cell membrane induced by plasma-generated reactive oxygen species”
R. Tero, R. Yamashita, H. Hashizume, Y. Suda, H. Takikawa, M. Hori, M. Ito
Archives of Biochemistry and Biophysics, Vol.605, No.1, pp.26-33 (2016.9), doi:http://dx.doi.org/10.1016/j.abb.2016.05.014
 191. “Development of gliding arc plasma jet with a bent nozzle for pre-treatment of inkjet printing in roll-to-roll processlng”
Y. Uchida, S. Okuda, N. Hayashi, T. Harigai, Y. Suda, H. Takikawa, H. Tanoue, I. Yamamoto, H. Shiki
Frontier of Applied Plasma Tlechnology, Vol.9, No.2, pp.55-60 (2016.7)
 190. “Preparation of self-supporting Au thin films on perforated substrate by releasing from water-soluble sacrificial layer”
Y. Miyamoto, Y. Fujii, M. Yamano, T. Harigai, Y. Suda, H. Takikawa, T. Kawano, M. Nishiuchi, H. Sakaki, K. Kondo
Japanese Journal of Applied Physics, Vol.55, 0pp.7LE054-1-5 (2016.7), doi:http://doi.org/10.7567/JJAP.55.07LE05
 189. “Optical properties of graphitic carbon nitride films prepared by evaporation”
S. Fujita, H. Habuchi, S. Takagi, H. Takikawa
Diamond and Related Materials, Vol.65, pp.83-86 (2016.5), doi:10.1016/j.diamond.2016.02.008
 188. “Precise measurement of single carbon nanocoils using focused ion beam techniques”
Y. Nakamura, Y. Suda, R. Kunimoto, T. Iida, H. Takikawa, H. Ue, H. Shima
Applied Physics Letters, Vol.108, 153108 (2016.4), doi:http://dx.doi.org/10.1063/1.4945724
 187. “Fabrication of diamond-like carbon microgears in room-temperature curing nanoimprint lithography using ladder-type hydrogen silsesquioxanen”
S. Kiyohara, Y. Shimizu, I. Ishikawa, T. Harigai, H. Takikawa, M. Watanabe, Y. Sugiyama, Y. Omata, Y. Kurashima
MRS Advances, Vol.1, pp.1119-6124 (2016.2), doi:10.1557/adv.2016.126
 186. “Fabrication of diamond-like carbon emitter patterns by room-temperature curing nanoimprint lithography with PDMS molds using polysiloxane”
S. Kiyohara, S. Yoshida, I. Ishikawa, T. Harigai, H. Takikawa, M. Watanabe, Y. Sugiyama, Y. Omata, Y. Kurashima
MRS Advances, Vol.1, pp.1075-1080 (2016.1), doi:10.1557/adv.2016.49
 185. “Reduction in lateral lipid mobility of lipid bilayer membrane by atmospheric pressure plasma irradiation”
Y. Suda, R. Tero, R. Yamashita, K. Yusa, H. Takikawa
Japanese Journal of Applied Physics, Vol.55, 03DF05-1-6 (2016.2), doi: http://doi.org/10.7567/JJAP.55.03DF05
 184. “Effects of catalyst support and chemical vapor deposition condition on synthesis of multi-walled carbon nanocoils”
Y. Suda, T. Iida, H. Takikawa, T. Harigai, H. Ue, Y. Umeda
AIP Conference Proceedings, Vol.1709, 020008-1-12 (2016.3), doi: 10.1063/1.4941207
 183. “Multigraphene growth on lead-pencil drawn sliver halide print paper irradiated by scanning femtosecond laser”
S. Kaneko, Y. Shimizu, T. Rachi, C. Kato, S. Tanaka, Y. Naganuma, T. Katakura, K. Satoh, M. Ushiyama, S. Konuma, Y. Itou, H. Takikawa, G. Tan, A. Matsuda, M. Yoshimoto
Japanese Journal of Applied Physics, Vol.55, 01AE24-1-4 (2015.12), doi:http://doi.org/10.7567/JJAP.55.01AE24
 182. “Electrochemical properties of fuel cell catalysts loaded on carbon nanomaterials with different geometries”
Y. Suda, Y. Shimizu, M. Ozaki, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
Materials Today Communications, Vol.3, pp.96-103 (2015.4), doi:10.1016/j.mtcomm.2015.02.003
 181. “Effective utilization of carbon nanocoil-supported PtRu anode catalyst by applying anode microporous layer for improved direct methanol fuel cell performance”
Y Shimizu, Y Suda, H Takikawa, H Ue, K Sshimizu, Y Umeda
Electrochemistry, Vol.83, No.5, pp.381-385 (2015.5), doi:10.7567/JJAP.54.01AF03
 180. “Real-time deformation of carbon nanocoils under axial loading”
T. Yonemura, Y. Suda, H. Shima, Y. Nakamura, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umedau
Carbon, Vol.83, pp.183-187 (2015.11), doi:10.1016/j.carbon.2014.11.034
 179 “Computational study of temporal behavior of incident species impinging on a water surface in dielectric barrier discharge for the understanding of plasma-liquid interface”
Y. Suda, A. Oda, R. Kato, R. Yamashita, H. Tanoue, H. Takikawa, R. Terou
Japanese Journal of Applied Physics, Vol.54, 01AF03-1-6, pp.1-6 (2014.11), doi:10.7567/JJAP.54.01AF03/
 178. “High-Yield synthesis of helical carbon nanofibers using iron oxide fine powder as a catalyst”
Y. Suda, K. Maruyama, T. Iida, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
Crystals, Vol.5, pp.47-60 (2015.1), doi:10.3390/cryst5010047
 177. “Expansion of lattice constants of aluminum nitride thin film prepared on sapphire substrate by ECR plasma sputtering method”
S. Kaneko, H. Torii, T. Amazawa, T. Ito, M. Yasui, M. Kurouchi, A. Fukushima, T. Tokumasu, S. Lee, S. Park, H. Takikawa, M. Yoshimoto
Japanese Journal of Applied Physics, Vol.53, 11RA11, pp.1-4 (2014.10), doi:10.7567/JJAP.53.11RA11
 176. “Plasma irradiation of artificial cell membrane system at solid-liquid interface”
R. Tero, Y. Suda, R. Kato, H. Tanoue, H. Takikawa
Applied Physics Express, Vol.7, 077001 (2014.11), doi:10.7567/APEX.7.077001
 175. “Improvement of carbon nanocoil purity achieved by supplying catalyst molecules from the vapor phase in chemical vapor deposition”
Y. Suda, Y. Ishii, T. Miki, K. Maruyama, H. Tanoue, H. Takikawa
Journal of Materials Research, VOl.29, 18, pp.2179-2187 (2014.9), doi: http://dx.doi.org/10.1557/jmr.2014.247
 174. 「グライディングアークの出射孔サイズが樹脂フィルム印字面前処理に及ぼす影響」
“Influence of exit aperture size of gliding arc on pre-treatment of polymer film prior to ink jet printing”
内田裕也,須田善行,滝川浩史,田上英人,山本五男
プラズマ応用科学, Vol.22, 1, pp.29-36 (2014.6)
 173. “Improving the characteristic of electric double layer capacitors using oxidized carbon nanoballoon”
Y. Okabe, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu
Electrochimica Acta, Vol.131, pp.207-213 (2014.6), doi:10.1016/j.electacta.2014.01.141
 172. “Electromagnetic wave absorption characteristics of multiwalled carbon nanocoils”
U. Eguchi, H. Takikawa , Y. Suda
Japanese Journal of Applied Physics, VOl.53, 045102, pp.1-4 (2014.3), doi:10.7567/JJAP.53.045102
 171. “Use of carbon nanocoil as a catalyst support in direct methanol fuel cell”
Y. Suda, S. Kaida, M. Ozaki, Y. Shimizu, Y. Okabe, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu
AIP Conference Proceedings, VOl.1585, pp.77-88 (2014.1), doi:10.1063/1.4866623
 170. “Improved mechanical properties of bucky paper achieved via the addition of carbon nanocoils”
K. Maruyama, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
AIP Conference Proceedings, Vol.1585, pp.89-96 (2014.1), doi:10.1063/1.4866624
 169. “Fabrication of DLC-based micro-gear patterns by room-temperature curing nanoimprint lithography using glass-like carbon molds”
S. Kiyohara, T. Ikegaki, C. Ito, I. Ishikawa, H. Tanoue, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Omata, Y. kurashima
Materials Research Society Symposia Proceedings., Vol.1511, msf12-1511-ee05-01, (2013.1), doi:10.1557/opl.2013.21
 168. “Improvement in the characteristics of electric double layer capacitor using a mixture of arc black and carbon nanoballoon”
Y. Okabe, H. Izumi, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu
Japanese Journal of Applied Physics, Vol.52, pp.11NL05-1-4 (2013.11), doi:10.7567/JJAP.52.11NM05
 167. “Optimization of chemical vapor deposition for reducing the fiber diameter and number of graphene layers in multi-walled carbon nanocoils”
S. L. Lim, Y. Suda, K. Takimoto, Y. Ishii, K. Maruyama, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu,Y. Umeda
Japanese Journal of Applied Physics, Vol.52, pp.11NL04-1-7 (2013.11), doi:10.7567/JJAP.52.11NL04
 166. 「カーボンナノコイルを用いた電気二重層キャパシタの作製と高電圧掃引速度における充放特性」
“Manufacturing of electric double-layer capacitors using carbon nanocoils and evaluation of their specific capacitance at a high ccan rate”
泉陽嵩, 須田善行, 滝川浩史, 田上英人, 植仁志, 清水一樹
電気学会論文誌, Vol.A-133, 45, pp.660-667 (2013.12), doi:10.1541/ieejfms.133.660
 165. “Properties of epitaxial AlN thin film deposited on sapphire substrate by ECR plasma”
S. Kaneko, T. Ito, M. Yasui, M. Kurouchi, H. Torii, T. Amazawa,T. Tokumasu, T. Nagano, S. Lee, S. Park, H. Takikawa
IEEE Advanced Infocomm Technology, pp.69-70 (2013.7), doi:10.1109/ICAIT.2013.6621498
 164. “Plasma processing for carbon nanomaterials. syntheses of nanostructures and their process control by numerical simulation of plasma”
Y. Suda, H. Takikawa, H. Tanoue
Electronics and Communications in Japan, Vol.096, 6, pp.1-8 (2013.5), doi:10.1002/ecj.11504
 163. “Supporting PtRu catalysts on various types of carbon nanomaterials for fuel cell applications”
Y. Suda, M. Ozaki, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, H. Muramoto
Journal of Physices:Conference Series, Vol.433, 1, pp.1-12 (2013.4), doi:10.1088/1742-6596/433/1/012008
 162. “Nanofabrication of DLC-dot arrays by room-temperature curing Imprint-liftoff method”
S. Kiyohara, S. Matta, I. Ishikawa, H. Tanoue, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima
Materials Research Society Symposia Proceedings, Vol.1511, msf12-1511-ee05-02, pp.1-6 (2013.1), doi: 10.1557/opl.2013.15
 161. “Fabrication of Micro-OLEDs by room-temperature curing nanocontact-print lithography using DLC molds”
I. Ishikawa, K. Sakurai, S. Kiyohara, T. Okuno, H. Tanoue, Y. Suda, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima
Materials Research Society Symposia Proceedings., Vol.1511, mrsf12-1511-ee05-01, pp.1-7 (2013.1), doi:10.1557/opl.2012.1711
 160. “Contract lattice constant in epitaxial MgO thin film from point view of ab initio calculation”
S. Kaneko, M. Yoshimoto, H. Takikawa
Proceedings of the International Conference on Research in Condensed Matter Physics, pp.4-7 (2012)
 159. “Torsion fracture of carbon nanocoils”
T. Yonemura, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
Journal of Applied Physics, Vol.112, No.8, pp.1-4 (2012.10), doi:10.1063/1.4758921
 158. 「膜種の異なるDLCの有機酸潤滑下における摩擦特性」
“Friction properties of various DLC coatings under organic acid lubrication”
吉田健太郎,加納眞,滝川浩史,益子正文
トライボロジスト, Vol.57, No.6, pp.426-431 (2012.6)
 157. “Fabrication of diamond nanopit arrays by room-temperature curing nanoimprint lithography using glass-like carbon molds”
S. Kiyohara, C. Ito, I. Ishikawa, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima
Materials Research Society Symposia Proceedings, Vol.1395, mrsf1-1395-n12-02, pp.27-32 (2012.1), doi:10.1557/opl.2012.9
 156. “Effects of dielectric barrier discharge treatment conditions on the uprightness of carbon nanofibers”
Y. Sugioka, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
IEEE Transactions of Plasma Science, Vol.40, No.7, pp.1794-1800 (2012.6), doi:1109/TPS.2012.2199769
 155. 「カーボンナノ材料の創製のためのプラズマプロセシング-ナノ構造の合成及びそのプロセス制御のためのモデリング手法」
“Plasma processiong for carbon nanomaterials”
須田善行,滝川浩史,田上英人
電気学会論文誌, Vol. A-132, No.6, pp.421-427 (2012.6), doi:10.1541/ieejfms.132.421
 154. “Microorganism mediated synthesis of reduced graphene oxide films
Y. Tanizawa, Y. Okamoto, K. Tsuzuki, Y. Nagao, N. Yoshida, R. Tero, S. Iwasa, A. Hiraishi, Y. Suda, H. Takikawa, R. Numano, H. Okada, R. Ishikawa, A. Sandhu
Journal of Physics: Conference Series, Vol.352, 012011, pp.1-5 (2012.3), doi:10.1088/1742-6596/352/1/012011
 153. “Electrochemical properties of arc-black and carbon nano-balloon as electrochemical capacitor electrodes"
T. Sato, Y. Suda, H. Uruno, H. Takikawa, H. Tanoue, H. Ue, N. A
Journal of Physices:Conference Series, Vol.352, 012032, pp.1-8 (2012.3), doi:10.1088/1742-6596/352/1/012032
 152. 「ガスプラズマ銃支援フィルタードアーク蒸着装置を用いた窒化クロム膜の作製」
"CrN films prepared by plasma gun assisted filtered-arc-deposition method"
田上英人,柳田太一郎,神谷雅男,須田善行,滝川浩史,瀧真,長谷川祐史,石川剛史, 辻信広
プラズマ応用科学, Vol.19, No.2, pp.107-112 (2011.12)
 151. “Syntheses and Electronic Applications of Helical Carbon Nanofibers
Y. Suda, H. Takikawa, H. Tanoue
Carbon Nanotubes Applications on Electron Devices, Vol.50, 08JF08, pp.37-70 (2011.8), doi: 10.5772/25263
 150. “Effect of filament discharge on uprightness of carbon nanotwists tightly-adhered to substrate”
Y. Sugioka, M. Yokota, T. Pude, Y. Suda, H. Takikawa, H. Tanoue, H. Ue, Y. Umeda, K. Shimizu
Japanese Journal of Applied Physics, Vol. 50, pp.08JF08-1-5 (2011.8), doi:10.1143/JJAP.50.08JF08
 149. “Improvement of growth yield of multi-walled carbon nanocoils by mesoporous materials and Sn amount”
S. L. Lim, K. Takimoto, Y. Ishii, Y. Suda, H. Tanoue, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
Transactions of the Materials Research Society of Japan, Vol.36, No.3, pp.469-473 (2011.3), doi10.14723/tmrsj.36.469
 148. “Structural analysis of multi-walled carbon nanocoils synthesized with Fe-Sn catalyst supported on zeolite”
M. Yokota, Y. Suda, H. Takikawa, H. Ue, K. Shimizu, Y. Umeda
The Journal of Nanoscience and Nanotechnology, Vol.11, No.3, pp.2344-2348 (2011.3), doi:10.1166/jnn.2011.3126
 147. 「中真空動作磁気引き出し型ガスプラズマ銃の開発と基礎特性」
“Development of electromagnetically pulled-out gas plasma (EPOP) gun for medium vacuum and its fundamental discharge characteristics”
柳田太一郎,田上英人,神谷雅男,須田善行,滝川浩史,瀧真,長谷川祐史,石川剛史
電気学会論文誌,Vol.A-131, No. 2, pp.139-144 (2011.2), doi:10.1541/ieejfms.131.139
 146. “Mass density as basis parameter on mechanical properties under diamond-like carbon prepared in wide range of conditions using variety of methods”
S. Kaneko, T. Horiuchi, K. Yoshida, S. Tanaka, C. Kato, M. Kano, M. Kumagai, H. Tanoue, M. Kamiya, H. Takikawa
Japanese Journal of Applied Physics, Vol.50, pp.01AF11-1-3 (2011.1), doi:10.1143/JJAP.50.01AF11
 145. “Preparation of arc black and carbon nano-balloon by arc discharge and their application to fuel cell”
T. Ikeda, S. Kaida, T. Satou, Y. Suda, H. Takikawa, HTanoue, S. Oke, H. Ue, T. Okawa, N. Aoyagi, K. Shimizu
Japanese Journal of Applied Physics, Vol.50, No.1, pp.01AF13-1-3 (2011.1), doi:10.1143/JJAP.50.01AF13
 144. “Removal of diamond-like carbon film by oxygen-dominated plasma beam converted from filtered carbon-cathodic arc”
H. Tanoue, M. Kamiya, Y. Suda, S. Oke, H. Takikawa, Y. Hasegawa, M. Taki, N. Tsuji, T. Ishikawa, H. Yasui
Japanese Journal of Applied Physics, Vol.50, pp.01AF12-1-6 (2011.1), doi:10.1143/JJAP.50.01AF12
 143. 「フィルタードアークプラズマビームの磁界制御によるドロップレットフリーDLC膜の形成」
“Preparation of droplet-free diamond-like carbon film by magnetically controlled filtered-arc-plasma beam”
奥田浩史,神谷雅男, 田上英人,須田善行,滝川浩史
プラズマ応用科学, Vol.18, No.2, pp.159-164 (2010.12)
 142. “Role of aluminum oxide support layer in growth of carbon nanotubes by plasma-enhanced chemical vapor deposition”
Y. Suda, A. Ozeki, A. Okita, J. Nakamura, A. Oda, Y. Sakai, H. Sugawara, S. Oke, H. Takikawa
Industrial Application of Plasma Process, Vol.3, pp.41-52 (2010.11)
 141. “Splitting and flattening of helical carbon nanofibers by acid treatment”
M. Yokota, Y. Hosokawa, Y. Shinohara, T. Kawabata, K. Takimoto, Y. Suda S. Oke, H. Takikawa, Y. Fujimura,
T. Yamaura, S. Itoh, H. Ue, M. Morioki
Journal of Nanoscience and Nanotechnology, Vol.10, pp.3910-3914 (2010.6), doi:10.1166/jnn.2010.1964
 140. “Effect of gas introduction position on substrate etching by means of Ar-dominated graphite-cathodic-arc plasma beam in μT-FAD”
H. Tanoue, M. Kamiya, S. Oke, Y. Suda, H. Takikawa, Y. Hasegawa, M. Taki, N. Tsuji , T. Ishikawa, H. Yasui, S. Temmei, H. Takahashi
Thin Solid Films, Vol.518, pp.3546-3550 (2010.4), doi:10.1016/j.tsf.2009.11.050
 139. 「アークブラックへのRuO2ナノ粒子担持に及ぼすRuコロイド溶液のpHの影響」
“Influence of pH of Ru colloidal solution on supporting RuO2 nano-particles on arc-black”
宇留野光, 桶真一郎, 須田善行, 滝川浩史, 伊藤茂生, 植仁志, 青柳伸宣, 大川隆, 清水一樹
電気学会論文誌, Vol.A-130, No.3, pp.293-2942 (2010.3), doi:10.1541/ieejfms.130.293
 138. “T-shape filtered arc deposition system with built-in electrostatic macro-particle trap for DLC film preparation”
M. Kamiya, T. Yanagita, H. Tanoue, S. Oke, Y. Suda, H. Takikawa , M. Taki, Y. Hasegawa, T. Ishikawa, H. Yasui
Thin Solid Films,. Vol.518, pp.1498-1502 (2009.12) , doi:10.1016/j.tsf.2009.09.091
 137. 「フィルタードアーク蒸着で形成したダイヤモンドライクカーボン膜の光学特性」
“Optical properties of various diamond-like carbon films fabricated by filtered arc deposition”
神谷雅男, 川口祐輔, 田上英人,須田善行,滝川浩史
プラズマ応用科学, Vol.17, No.2, pp.125-132 (2009.12)
 136. “Preparation of various DLC films by T-shaped filtered arc deposition and the effect of heat treatment on film properties”
M. Kamiya, H. Tanoue, H. Takikawa, M. Taki, Y. Hasegawa, M. Kumagai
Vacuum, Vol.83, pp.510-514 (2008.10), doi:10.1016/j.vacuum.2008.04.016
 135. “Removal of machine oil from metal surface by mesoplasma jet under open atmosphere”
H. Saito, H. Shiki, K. Tsujii, S. Oke, Y. Suda, H. Takikawa, T. Okawa, S. Yamanaka
Japanese Journal of Applied Physics, Vol.48, pp.08HH03-1-5 (2009.8), doi:10.1143/JJAP.48.08HH03
 134. “Nanofabrication of three-dimensional imprint diamond molds by ECR oxygen ion beams using polysiloxane”
S. Kiyohara, T. Kashiwagi, H. Takikawa, Y. Kurashima, Y. Taguchi, Y. Sugiyama
e-Journal of Surface Science and Nanotechnology, Vol.7, pp.772-776 (2009.7), doi:http://doi.org/10.1380/ejssnt.2009.772
 133. “Carbon-nanotube growth in alcohol-vapor plasma”
Y. Suda, A. Okita, J. Takayama, A. Oda, H. Sugawara, Y. Sakai, S. Oke, H. Takikawa
IEEE Transactions on Plasma Science, Vol.37, No.7, pp.1150-1155 (2009.7), doi:10.1109/TPS.2009.2015451
 132. “Development of Y-shaped filtered-arc-deposition system for preparing multielement composition-controlled film”
H. Tanoue, H. Hikosaka, T. Mashiki, S. Oke, Y. Suda, H. Takikawa, Y. Hasegawa, M. Taki, M. Kamiya, T. Ishikawa, H. Yasui
IEEE Transactions on Plasma Science, Vol.37, No.7, pp.1140-1145 (2009.7), doi:10.1109/TPS.2009.2014765
 131. “Development of twin PEN-Jet system for oil film removal”
H. Takikawa, H. Saito, H. Shiki, K. Tujii, S. Oke, Y. Suda, S. Yamakawa, T. Okawa
Frontier of Applied Plasma Technology, Vol.2, pp.39-42 (2009.7)
 130. 「ツイントーチアーク装置を用いたナノカーボン合成」
“Synthesis of nano carbon by twin-torch-arc apparatus”
桶真一郎, 篠原賢司, 滝川浩史, 伊藤茂夫, 山浦辰夫, 植仁志, 榊原敏洋, 菅原秀一, 大川隆, 青柳伸宣, 清水一樹
プラズマ応用科学, Vol.7, No.1, pp.9-14 (2009.6)
 129. “Argon-dominated plasma beam generated by filtered vacuum arc and its substrate etching”
H. Tanoue, M. Kamiya, S. Oke, Y. Suda, H. Takikawa, Y. Hasegawa, M. Taki, M. Kumagai, M. Kano, T. Ishikawa, H. Yasui
Applied Surface Science,Vol.255,pp.7780-7785 (2009.7), doi:10.1016/j.apsusc.2009.04.170
 128. “Rearrangement of twisted carbon nanofibers by filamentary discharge treatment in N2 gas”
Y. Shinohara, Y. Hosokawa, M. Yokota, H. Shiki, S. Oke, Y. Suda, H. Takikawa, Y. Fujimura, T. Yamaura, S. Itoh, H. Ue, M. Morioki
Application of Plasma Process, Vol.2, pp.15-23 (2009.5)
 127. “DMFC catalyst layer prepared using arc-soot nano-carbon by dry-squeegee method and its impedance analysis”
S. Oke, Y. Izumi, T. Ikeda, H. Uruno, Y. Suda, H. Takikawa, S. Itoh, T. Yamaura, H. Ue. T. Sakakibara, S. Sugawara, T. Okawa, N. Aoyagi
Electrochemistry, Vol.77, No.3, pp.210-213 (2009.3), doi:10.5796/electrochemistry.77.210
 126. 「大気圧メゾプラズマジェットにおけるPt-Rh電極の損耗」
“Erosion of Pt-Rh electrode in atmospheric-pressure mesoplasma jet”
志岐肇,桶真一郎,須田善行,滝川浩史,山中重宣,大川隆
電気学会論文誌, Vol.A-129, 3, pp.157-158 (2009.3), doi:10.1541/ieejfms.129.157
  125. “Specific capacitance of electrochemical capacitor using RuO2 loading arc-soot/activated carbon composite electrode”
S. Oke, M. Yamamoto, K. Shinohara, H. Takikawa, H. Xiaojun, S.Itoh, T.Yamaura, K. Miura, K. Yoshikawa, T. Okawa, N. Aoyagi
Chemical Engineering Journal, Vol.146, pp.434-438 (2009.2), doi:10.1016/j.cej.2008.10.005
 124. “Electrochemical performance of RuOx/activated carbon black composite for supercapacitors
He X.J., Y. J. Geng, S. Oke, K. Higashi, M. Yamamoto, H. Takikawa
Synthetic Metals, Vol.159, pp.7-12(2009.1), doi:10.1016/j.synthmet.2008.07.008
 123. 「パルスグライディングアークにおける直列インダクタンスの影響」
"Influence of series inductance in pulsed gilding arc discharge"
志岐肇,齋藤春樹,桶真一郎,須田善行,滝川浩史,大川隆,山中重宣,西村芳美,菱田茂二,薄木英二
プラズマ応用科学,Vol.16, No.2, pp.105-112 (2008.12)
 122. “Filament discharge enhances field emission properties by making twisted carbon nanofibres stand up”
Y. Hosokawa, Y. Shinohara, M. Yokota, H. Shiki, Y. Suda, S. Oke, H. Takikawa, T. Ina, M. Morioki, Y. Fujimura, T. Yamaura, S. Itoh, K. Miura
Journal of Physics D: Applied Physics, Vol.41, No.20, pp.1-5 (2008.10), doi:10.1088/0022-3727/41/20/205418
 121. “Dispersion of Pt/Ru catalyst onto arc-soot and its performance evaluation as DMFC electrode”
S. Oke, K. Higashi, K. Shinohara, Y. Izumi, H. Takikawa, T. Sakakibara, S. Itoh, T. Yamaura, G. Xu, K. Miura, K. Yoshikawa, T. Sakakibara, S. Sugawara, T. Okawa, N. Aoyagi
Chemical Engineering Journal, Vol.143, pp. 225-229 (2008.9), doi:10.1016/j.cej.2008.04.010
 120. “Fundamental properties of 4-in-1 Plasma ENergized-Jet at atmospheric pressure”
H. Shiki, Y. Ito, H. Takikawa, E. Usuki, T. Okawa, S. Yamanaka, Y. Nishimura, S. Hishida
Vacuum, Vol.83, pp.29-33 (2008.9), doi:10.1016/j.vacuum.2008.03.033
 119. “Low-temperature sintering of indium tin oxide thin film using split gliding arc plasma”
Y. Ito, H. Shiki, H. Takikawa, T. Ootsuka, T. Okawa, S. Yamanama, E. Usuki
Japanese Journal of Applied Physics, Vol.47, No.8S2, pp. 6956--6959 (2008.8), doi:10.1143/JJAP.47.6956
 118. “TiAlN film preparation by Y-shape filtered-arc-deposition system”
T. Mashiki, H. Hikosaka, H. Tanoue, H. Takikawa, Y Hasegawa, M. Taki, M. Kumagai, M. Kamiya
Thin Solid Films, Vol.516, pp.6650-6654 (2007.8) , doi:10.1016/j.tsf.2007.11.097
 117. 「4-in-1 PEN-Jetにおける内部電極放電電流の個別制御」
“Indvidual control of discharge current of inner electrodes in 4-in-1 pen-jet”
志岐肇,齋藤春樹,桶真一郎,須田善行,滝川浩史,薄木英二,大川隆,山中重宣,西村芳美,菱田茂二
プラズマ応用科学,Vol.16, No.1, pp.69-72 (2008)
 116. “Development of split gliding arc for surface treatment of conductive material”
H. Shiki, J. Motoki, Y. Ito, H Takikawa, T. Ootsuka, T. Okawa, S. Yamanaka, E. Usuki, Y Nishimura, S. Hishida, T. Sakakibara
Thin Solid Films, Vol.516, No.11, pp.3684-3689 (2008.4), doi:10.1016/j.tsf.2007.08.047
 115. “Preparation of powdery carbon nanotwist and application to printed field emitter”
Y. Hosokawa, H. Shiki, Y. Shinohara, M. Yokota, H. Takikawa, T.Ina, F Okada, Y. Fujimura, T. Yamaura, S. Itoh, K. Miura, K. Yoshikawa
Research Letters in Materials Science, Vol.2007, Article ID 59167, pp.1-5 (2008.1)
 114. 「大気圧空気メゾプラズマジェット発生用パルスアークにおける電極損耗」
“Electrode erosion in pulsed arc for generating air meso-plasma jet under atmospheric pressure”
志岐肇, 元木 純平, 滝川 浩史, 榊原 建樹, 西村 芳実, 菱田 茂二,大川 隆,大塚 剛史
電気学会論文誌, Vol.A-127, No.10, pp.567-573 (2007.10), doi:10.1541/ieejfms.127.567
 113. “Development of X-shaped filtered-arc-deposition (X-FAD) apparatus and DLC/Cr film preparation”
H. Tanoue, H. Hikosaka, Y. Iwasaki, H. Takikawa, T. Sakakibara, Y. Hasegawa
IEEE Transactions on Plasma Science, Vol.35, pp.1014-1019 (2007.8), doi:10.1109/TPS.2007.896755
 112. “Review of cathodic arc deposition for preparing droplet-free thin films
H. Takikawa, H. Tanoue
IEEE Transactions on Plasma Science, Vol.35, pp.992-999 (2007.8), doi:10.1109/TPS.2007.897907
 111. 「マルチインナー電極大気圧プラズマジェットの開発」
“Development of atmospheric-pressure plasma-jet with multi-inner-electrodes”
志岐肇,元木純平,伊藤之一,滝川浩史,薄木英二,大塚剛史,大川隆,山中重宣,榊原建樹
プラズマ応用科学,Vol.15, No.1, pp.23-28 (2007.6)
 110. “Poly(L-lactide)/C60 nanocomposites: Effects of C60 on crystallization of poly(L-lactide)”
H. Tsuji, Y. Kashima, H. Takikawa
Journal of Polymer Science : Part B : Polymer Physics, Vol.45, pp.2167-2176 (2007.6), doi:10.1002/polb.21215
 109. “Poly(L-lactide)/nano-structured carbon composites: Conductivity, thermal properties, crystallization, and biodegradation”
H. Tsuji, Y. Kawashima, H. Takikawa, S. Tanaka
Polymer, Vol.48, pp.4213-4225 (2007.6), doi:10.1016/j.polymer.2007.05.040
 108. “Influence of duct bias on deposition rate of DLC film in T-shape filtered arc deposition”
Y. Iwasaki, S. Minamisawa, H. Takikawa, T. Sakakibara, H. Hasegawa
Vacuum, Vol.80, pp.1266-1271 (2006.9), doi:10.1016/j.vacuum.2006.01.060
 107. 「厚膜ta-C形成用X字状フィルタードアーク蒸着装置の開発」
“Development of X-shape filtered arc deposition apparatus for thick ta-C film coating”
彦坂博紀,岩崎康浩,滝川浩史,榊原建樹,長谷川裕史,辻信広
電気学会論文誌, Vol.A-126, No8, pp.757-762 (2006.8), doi:10.1541/ieejfms.126.757
 106. “Optimum production-condition of arc soot as raw material for carbon-nanoballoon”
H. Niwa, K. Higashi, K. Shinohara, H. Takikawa, T. Sakakibara, K. Yoshikawa, K. Miura, S. Itho, T. Yamaura
Smart Processing Technology, Vol.1, pp.57-60 (2006.8)
 105. “Non-isothermal crystallization behavior of poly(L-lactic acid) in the presence of various additives”
H. Tsuji, H. Takai, N. Fukuda, H. Takikawa
Macromolecular Materials and engineering, Vol.291, No.4, pp.325-335 (2006.3), doi:10.002/mame.200500371
 104. 「アーク放電によるナノカーボン粒子の合成とPt-Ru触媒担持」
“Systhesis of nanocarbon particle by arc discharge plasma and Pt-Ru catalyst dispersion”
東敬亮,丹羽宏彰,滝川浩史,榊原建樹,伊藤茂生,山浦辰雄,徐 国春,三浦光治,吉川和男
プラズマ応用科学,Vol.13, pp.99-104 (2005.12)
 103. “Parametric study on growth of carbon nanocoil by catalytic chemical vapor deposition”
G. Xu, B. Chen, H. Shiki, T. Katsumata, H. Takikawa, T. Sakakibara, S. Itoh, T. Ina
Japanese Journal of Applied Physics, Vol.44, Part1, No.4A, pp.1569-1576 (2005.4), doi:0.1143/JJAP.44.1569
 102. “Carbon nanoballoon produced by thermal treatment of arc soot”
G. Xu, H. Niwa, T. Imaizumi, H. Takikawa, T. Sakakibara, K. Yoshikawa, A. Kondo, S. Itoh
New Diamond and Frontier Carbon Technology, VOl.15, No.2, pp.73-81 (2005.2)
 101. 「グライディングアークプラズマのマルチ化技術」
“Pluralization technique of gliding arc plasma”
志岐肇,元木純平,滝川浩史,徐国春,榊原建樹,西村芳実,菱田茂二,西毅,大川隆
プラズマ応用科学,Vol.12,pp.41-46 (2004.12)
 100. “Fabrication of diamond-like carbon film on rubber by T-shape filtered-arc-deposition under the influence of various ambient grses”
H. Takikawa, N. Miyakawa, S. Minamisawa, T. Sakakibara
Thin Solid Films, Vol.457, pp.143-150 (2004.6), doi:10.1016/j.tsf.2003.12.029
  99. “Effect of multi-catalysts on carbon nanofiber synthesis in CVD”
B. Chen, Y. Fujimura, T. Kastumata, H. Takikawa, Y. Hibi, T. Sakakibara, S. Itoh
Transactions of the Materials Research Society of Japan, Vol.29, No.2, pp.559-562 (2004.4)
  98. “Synthesis of twisted carbon nanofiber by catalytic CVD method”
T. Katsumata, Y. Fujimura, M. Nagayama, H. Tabata, H. Takikawa, Y. Hibi, T. Sakakibara, S. Itoh
Transactions of the Materials Research Society of Japan, Vol.29, No.2, pp.501-504 (2004.4)
  97. “Physical-chemical hybrid deposition of DLC film on rubber by T-shape filtered-arc-deposition”
N. Miyakawa, S. Minamisawa, H. Takikawa, T. Sakakibara
Vacuum, Vol.73, pp.611-617 (2004.4), doi:10.1016/j.vacuum.2003.12.079
  96. 「真空アーク蒸着法によるダイヤモンド様炭素成膜における巨視的プロセス特性の陰極素材依存性」
“Cathode material dependence on macroscopic process properties in DLC film preparation using filtered cathodic arc deposition”
南澤伸司,宮川伸秀,滝川浩史,榊原建樹,窪島隆一郎,椎名祐一
真空, Vol.47, No.3, pp.200-203 (2004.3), doi:10.3131/jvsj.47.200
  95. 「真空アーク蒸着法によるゴム表面へのDLC膜形成」
“Preparation of DLC film on rubber surface by vacuum arc deposition”
宮川伸秀,南澤伸司,岩崎康浩,松下卓史,竹村恵子,滝川浩史,榊原建樹
プラズマ応用科学,Vol.11,pp.81-86 (2003.12)
  94. 「高水素貯蔵容量の単層カーボンナノチューブの開発」
“Single-walled carbon nanotubes with high hydrogen capacity”
西宮伸幸,石垣幸一,蛯名武雄,滝川浩史,日比美彦,榊原建樹
炭素, Vol.2003, No.210, pp.199-204 (2003.12), doi:10.7209/tanso.2003.199
  93. 「T字状フィルタードアーク蒸着装置によるゴム表面への柔軟性DLC膜形成」
“Preparation of elastic DLC film on rubber by t-shape filtered arc deposition”
滝川浩史,宮川伸秀,年藤淳吾,南澤伸司,松下卓史,竹村恵子,榊原建樹
電気学会論文誌,Vol.A-123, No.8, pp.738-743 (2003.8), doi:10.1541/ieejfms.123.738
  92. “Cold arc-plasma jet under atmospheric pressure for surface modification”
J. Toshifuji, T. katsumata, H. Takikawa, T. Sakakibara, I. Shimizu
Surface and Coatings Technology, Vol.171, pp.302-306 (2003.7), doi:10.1016/S0257-8972(03)00290-1
  91. “Development of shielded cathodic arc deposition with a superconductor shield”
H. Takikawa, N. Miyakawa, T. Sakakibara
Surface and Coatings Technology, Vol.171, pp.162-166 (2003.7), doi:10.1016/S0257-8972(03)00262-7
  90. “Enhancement of shielded cathodic arc deposition”
H. Takikawa, M. Nagayama, R. Miyano, T. Sakakibara
Surface and Coatings Technology, Vol.169-170, pp.49-52 (2003.6), doi:10.1016/S0257-8972(03)00079-3
  89. “Surface modification of PET film by plasma-based ion implantation”
N. Sakudo, D. Mizutani, Y. Ohmura, H. Endo, R. Yoneda, N. Ikenaga, H. Takikawa
Nuclear Instruments and Methods in Physics Research, Vol.B-206, pp.687-690 (2003.5), doi:0.1016/S0168-583X(03)00824-3
  88. 「磁気輸送シールド型真空アーク蒸着法によるCu配線膜形成の基礎実験」
“Preliminary experiments of Cu interconnect preparation by magnetically transported-shielded cathodic arc deposition”
宮川伸秀,南澤伸司,丸中正雄,土井聡也,滝川浩史,榊原建樹
電気学会論文誌,Vol.A-123, No.5, pp462-467 (2003.5), doi:10.1541/ieejfms.123.462
  87. “Effect of ambient gas and pressureon fullerene synthesis in induction thermal plasma”
C. Wang, A. Inazaki, T. Shirai, Y. Tanaka, T. Sakuta, H. Takikawa, H. Matsuo
Thin Solid Films, Vol.425, pp.41-48 (2003.2), doi:10.1016/S0040-6090(02)01128-8
  86. “DLC thin film preparation by cathodic arc deposition with a super droplet-free system”
H. Takikawa, K. Izumi, R. Miyano, T. Sakakibara
Surface and Coatings Technology, Vol.163-164, pp.368-373 (2003.1), doi:10.1016/S0257-8972(02)00629-1
  85. 「プラズマイオン注入/成膜装置から漏洩するX線の計測」
“Measurement of X-ray leaked from plasma based ion implantation/deposition apparatus”
日比美彦,滝川浩史,年藤淳吾,西村芳実,榊原建樹
プラズマ応用科学,Vol.10,pp.102-109 (2002.12)
  84. “The properties of nanocomposite aluminium-silicon based thin films deposited by filtered arc deposition”
A. Bendavid, P. Martin, H. Takikawa
Thin Solid Films, Vol.420, pp.83-88 (2002.12), doi:10.1016/S0040-6090(02)00660-0
  83. “Transformation of graphite into multi-walled carbon nanotubes by AC torch-arc”
H. Takikawa, M. Kato, Y. Hibi, T. Sakakibara, T. Tahara, S. Itoh
Physica B, Vol.323, pp.287-289 (2002.10), doi:10.1016/S0921-4526(02)01024-4
  82. “Fabrication of single-walled carbon nanotubes and nanohorns by means of a torch arc in open air”
H. Takikawa, M. Ikeda, K. Hirahara, Y. Hibi, Y. Tao, P.A. Ruiz Jr., T. Sakakibara, S. Itoh, S. Iijima
Physica B, Vol.323, pp.277-279 (2002.10) , doi:10.1016/S0921-4526(02)00998-5
  81. “Preparation of carbon nanohorn aggregates by cavity arc jet in open air”
M. Ikeda, H. Takikawa, T. Tahara, Y. Fujimura, M. Kato, K. Tanaka, S. Itoh, T. Sakakibara
Japanese Journal of Applied Physics, Vol.41, Part 2, No.7B, L852-854 (2002.7), doi:10.1143/JJAP.41.L852
  80. “Hydrogen sorption by single-walled carbon nanotubes prepared by a torch arc method”
N. Nishimiya, K. Ishigaki, H. Takikawa, M. Ikeda, Y. Hibi, T. Sakakibara, A. Matsumoto, K. Tsutsumi
Journal of Alloys and Compounds, Vol.339, pp.275-282 (2002.6), doi:10.1016/S0925-8388(01)02007-2
  79. “Cathodic arc deposition with activated anode (CADAA) for preparation of in situ doped thin solid films”
H. Takikawa, K. Kimura, R. Miyano, T. Sakakibara
Vacuum, Vol.65, pp.443-438 (2002.5), doi:10.1016/S0042-207X(01)00453-5
  78. “Influence of gap length and pressure on medium vacuum arc with Ti cathode in various ambient gases”
R. Miyano, T. Saito, H. Takikawa, T. Sakakibara
Thin Solid Films, Vol.407, pp.221-226 (2002.3), doi:10.1016/S0040-6090(02)90042-8
  77. “Silicon inclusion effect on fullerene formation under induction thermal plasma condition”
C. Wang, T. Imahori, Y. Tanaka, T. Sakuta, H. Takikawa, H. Matsuo
Thin Solid Films, Vol.407, pp.72-78 (2002.3) , doi:10.1016/S0040-6090(02)00015-9
  76. 「磁気フィルタ型陰極アークプラズマによるダイヤモンドライクカーボン薄膜の合成」
“Deposition of diamond-like carbon film using magnetically filtered cathodic-arc-plasma”
滝川浩史,泉喜久夫,榊原建樹
プラズマ応用科学, Vol.9, pp.49-56 (2001.12)
  75. “Cathode spot motion in vacuum arc of zinc cathode under oxygen gas flow”
R. Miyano, Y. Fujimura, H. Takikawa, T. Sakakibara, M. Nagao
IEEE Transactions on Plasma Science, Vol.29, pp.713-719 (2001.10), doi:10.1109/27.964460
  74. “New simple method of carbon nanotube fabrication using welding torch”
H. Takikawa, Y. Tao, Y. Hibi, R. Miyano, T. Sakakibara, Y. Ando, S. Ito, K. Hirahara, S. Iijima
CP590, Nanonetwork Materials; AIP, pp.31-34 (2001.2), doi:10.1063/1.1420050
  73. “Carbon nanotubes on electrodes in short-time heteroelectrode arc”
H. Takikawa, Y. Tao, R. Miyano, T. Sakakibara, Y. Ando, X. Zhao, K. Hirahara, S. Iijima
Materials Science and Engineering: C, Vol.16, No.1-2, pp.11-16 (2001.10), doi:10.1016/S0928-4931(01)00294-6
  72. “Anode mode in cathodic arc deposition apparatus with various cathodes and ambient gases”
R. Miyano, T. Saito, K. Kimura, M. Ikeda, H. Takikawa, T. Sakakibara
Thin Solid Films, Vol.390, pp.192-196 (2001.6), doi:10.1016/S0040-6090(01)00918-X
  71. “Synthesis of fullerenes from carbon powder by using high power induction thermal plasma”
C. Wang, T. Imahori, Y. Tanaka, T Sakuta, H. Takikawa, H. Matsuo
Thin Solid Films, Vol.390, pp.31-36 (2001.6), doi:10.1016/S0040-6090(01)00937-3
  70. “Formation and deformation of multiwall carbon nanotubes in arc discharge”
H. Takikawa, Y. Tao, R. Miyano, T. Sakakibara, X. Zhao, Y. Ando
Japanese Journal of Applied Physics, Vol.40, Part 1, No.5A, pp.3414-3418 (2001.5), doi:10.1143/JJAP.40.3414
  69. “Simple preparation of carbon-nanotubed field emitting surface using a welding arc torch”
H. Takikawa, Y. Tao, Y. Hibi, R. Miyano, T. Sakakibara, Y. Ando, S. Ito, K. Nawamaki
The Transactions of the Institute of Electrical Engineers in Japan (電気学会論文誌), Vol.A-121, pp.495-196 (2001.5)
  68. “Effect of substrate bias on AlN thin film preparation in shielded reactive vacuum arc deposition”
H. Takikawa, K. Kimura, T. Sakakibara, A. Bendavid, P. J. Martin, A. Matsumuro, K. Tsutsumi
Thin Solid Films, Vol.386, pp.276-280 (2001.5), doi:10.1016/S0040-6090(00)01673-4
  67. “Corrosion resistance of TiN coatings produced by various dry processes”
R. Morita, K. Azuma, S. Inoue, R. Miyano, H. Takikawa, A. Kobayashi, E. Fujiwara, H. Uchida, M. Yatsuzuka
Surface and Coatings Technology, Vol.136, pp.207-210 (2001.2), doi:10.1016/S0257-8972(00)01057-4
  66. 「真空アークプラズマの磁気輸送とドロップレット削減効果」
“Magnetic transportation of vacuum arc plasma and droplet filtering”
池田光邦,泉喜久夫,宮野竜一,日比美彦,滝川浩史,榊原建樹
プラズマ応用科学,Vol.8,pp.80-87 (2000.12)
  65. “ZnO film formation using a steered and shielded reactive vacuum arc deposition”
H. Takikawa, K. Kimura, R. Miyano, T. Sakakibara
Thin Solid Films, Vol.377-378, pp.74-80 (2000.12), doi:10.1016/S0040-6090(00)01387-0
  64. “Preparation of metal nitride and oxide thin films using shielded reactive vacuum arc deposition”
R. Miyano, K. Kimura, K. Izumi, H. Takikawa, T. Sakakibara
Vacuum, Vol.59, pp.159-167 (2000.10), doi:10.1016/S0042-207X(00)00266-9
  63. “Amorphous carbon fibrilliform nanomaterials prepared by chemical vapor deposition”
H. Takikawa, M. Yatsuki, R. Miyano, M. Nagayama, T. Sakakibara, S. Itoh, Y. Ando
Japanese Journal of Applied Physics, Vol.39, Part 1, No.9A, pp.5177-5179 (2000.9), doi:10.1143/JJAP.39.5177
  62. “Carbon nanotube growth at cathode spot in vacuum arc”
H. Takikawa, Y. Tao, R. Miyano, T. Sakakibara, Y. Ando, S. Itoh
Transactions of the Materials Research Society of Japan, Vol.25, pp.873-876 (2000.9)
  61. “Preparation of fullerene thin films by ion plating and transmittance analysis”
R. Miyano, M. Ikeda, H. Takikawa, T. Sakakibara
The Transactions of the Institute of Electrical Engineers in Japan (電気学会論文誌), Vol.A-120, No.8/9, pp.851-852 (2000.12)
  60. “Ion energy measurement in shielded vacuum arc with graphite cathode”
R. Miyano, M. Nagayama, H. Takikawa, T. Sakakibara
The Transactions of the Institute of Electrical Engineers in Japan (電気学会論文誌), Vol.A-120, No.6. pp.724-725 (2000.6)
  59. “ZnO film fabrication by reactive shielded vacuum arc deposition”
H. Takikawa, K. Kimura, R. Miyano, T. Sakakibara
Transactions of the Materials Research Society of Japan, Vol.25, No.1, pp.345-348 (2000.4)
  58. “Carbon nanotubes in cathodic vacuum arc discharge”
H. Takikawa, M. Yatsuki, T. Sakakibara, S. Itoh
Journal of Physics D: Applied Physics, Vol.33, No.7, pp.826-830 (2000.4), doi: 10.1088/0022-3727/33/7/311
  57. “Deposition and modification of titanium dioxide thin films by filtered arc deposition”
A. Bendavid, P. J. Martin, H. Takikawa
Thin Solid Films, Vol.360, 241-249 (2000.2), doi: 10.1016/S0040-6090(99)00937-2
  56. 「プラズマイオン注入法および各種ドライプロセス法によって作製したTiNの耐食性評価」
“Corrosion resistance of TiN prepared by plasma-based ion implantation and various dry processes”
東欣吾,森田隆平,八束充保,井上尚三,内田仁,宮野竜一,滝川浩史,小林明
プラズマ応用科学,Vol.7,pp.30-37 (1999.12)
  55. 「パルス電流真空アークの放電特性とドロップレット抑制効果」
“Discharge characteristics of vacuum arc with pulse current and efficiency of macrodroplet suppression”
木村圭作,滝川浩史,榊原建樹
プラズマ応用科学,Vol.7,pp.3-10 (1999.12)
  54. 「TiN膜生成用シールド型真空アーク蒸着装置におけるプラズマパラメータ計測」
“Measurements of plasma parameters in a shielded vacuum arc deposition apparatus for TiN film fabrication”
宮野竜一,滝川浩史,新迫浩二,榊原建樹
電気学会論文誌,Vol.A-119,No.12, pp.1397-1402 (1999.12)
  53. “Structural and optical properties of titanium oxide thin films deposited by filtered arc deposition”
A. Bendavid, P. J. Martin, A*. Jamting, H. Takikawa
Thin Solid Films, Vol.355-356, pp.6-11 (1999.11), doi:10.1016/S0040-6090(99)00436-8
  52. “Synthesis of a-axis-oriented AlN film by a shielded reactive vacuum arc deposition method”
H. Takikawa, N. Kawakami, T. Sakakibara
Surface and Coatings Technology, Vol.120-121, pp.383-387 (1999.11), doi:10.1016/S0257-8972(99)00389-8
  51. 「種々の反応性真空アーク蒸着装置によるアモルファス酸化チタン膜の生成」
“Fabrication of amorphous titanium oxide films with various reactive vacuum arc deposition apparatuses”
滝川浩史,松井健晃,宮野竜一,榊原建樹,A. Bendavid, P. J. Martin
電気学会論文誌,Vol.A-119,No.10, pp.1243-1248 (1999.10)
  50. “Graphite cathode spot produces carbon nanotubes in arc discharge”
H. Takikawa, O. Kusano, T. Sakakibara
Journal of Physics D: Applied Physics, Vol.32, No.18, pp.2433-2437 (1999.9), doi:10.1088/0022-3727/32/18/315
  49. “N2 gas absorption in cathodic arc apparatus with an Al cathode under medium vacuum”
H. Takikawa, N. Kawakami, T. Sakakibara
IEEE Transactions on Plasma Science, Vol.27, pp.1034-1038 (1999.8), doi:10.1109/27.782277
  48. “Carbon nanotubes fabricated at the cathode spot in a vacuum arc”
H. Takikawa, M. Yatsuki, O. Kusano, T. Sakakibara
The Transactions of the Institute of Electrical Engineers in Japan (電気学会論文誌), Vol.A-119, No.8/9 , pp.1156-1157 (1999.8)
  47. “Ionized plasma vapor deposition and filtered arc deposition; processes, properties and applications”
P. J. Martin, A. Bendavid, H. Takikawa
Journal of Vacuum Science and Technology A, Vol.17, pp.2351-2359 (1999.7), doi:10.1116/1.581772
  46. “Properties of titanium oxide film prepared by reactive cathodic vacuum arc deposition”
H. Takikawa, T. Matsui, T. Sakakibara, A. Bendavid, P. J. Martin
Thin Solid Films, Vol.348, pp.145-151 (1999.7), doi:10.1016/S0040-6090(99)00054-1
  45. “Carbon nanotube preparation by arc discharge method in various gases”
H. Takikawa, A. M. Coronel, T. Sakakibara
The Transactions of the Institute of Electrical Engineers in Japan (電気学会論文誌), Vol.A-119, No.6, pp.901-902 (1999.6)
  44. “Synthesis of silicon oxide nanofibers by sublimation of SiC in medium vacuum with oxygen flow”
H. Takikawa, M. Yatsuki, T. Sakakibara
Japanese Journal of Applied Physics, Vol.38, Part 2, No.4A, pp.L401-L402 (1999.4), doi:10.1143/JJAP.38.L401
  43. “Solid-phase production of carbon nanotubes”
W. K. Hsu, Y. Q. Zhu, S. Trasobares, H. Terrones, M. Terrones, N. Grobert, H. Takikawa, J. P. Hare, H. W. Kroto, D. R. M. Walton
Applied Physics A: Materials Science & Processing, Vol.A-68, pp.493-495 (1999.3), doi:10.1007/s003390050931
  42. 「Ti陰極N2ガス導入真空アークプラズマの質量スペクトルおよびイオンエネルギー分布計測」
“Mass spectroscopy and ion energy distribution measurement in vacuum arc plasma with Ti cathode and N2 gas flow”
滝川浩史,宮野竜一,真鍋和男,榊原建樹
電気学会論文誌,Vol.A-119,No2, .pp.183-189 (1999.2)
  41. 「真空アーク蒸着装置におけるドロップレット遮蔽板の電流-電圧特性」
“Current-voltage characteristics of droplet shield plate in vacuum arc deposition apparatus”
宮野竜一,滝川浩史,真鍋和男,新迫浩二,榊原建樹
電気学会論文誌,Vol.A-119,No.1, pp.19-24 (1999.1)
  40. 「アーク放電法におけるフラーレン生産性の放電時間および冷却ジャケット径依存性」
“Dependences of discharge time and cooling jacket radius on fullerene production in arc discharge method”
滝川浩史,中村政則,榊原建樹
プラズマ応用科学,Vol.6,pp.16-22 (1998.12)
  39. 「反応性真空アーク蒸着法によって生成したアナターゼ型TiO2膜の光学バンドギャップ」
“Optical bandgap of anatase TiO2 film prepared by reactive vacuum arc deposition method”
滝川浩史,松井健晃,榊原建樹
電気学会論文誌,Vol.A-118,No.7/8, pp.899-900 (1998.7)
  38. “Decrease in fullerene productivity due to air leakage in carbon arc method”
H. Takikawa, M. Imamura, M. Kouchi, T. Sakakibara
Fullerene Science and Technology, Vol.6, pp.339-349 (1998.4)
  37. “Carbon nanotubes on SiC powder surface grown by a vacuum heating process”
H. Takikawa, R. Miyano, M. Yatsuki, T. Sakakibara
Japanese Journal of Applied Physics, Vol.37, Part 2, No.2A, pp.L187-189 (1998.2), doi:10.1143/JJAP.37.L187
  36. “TiN/Ti film formation by vacuum arc deposition with droplet shield plate”
H. Takikawa, K. Shinsako, T. Sakakibara
Thin Solid Films, Vol.316, pp.73-78 (1998.3), doi:10.1016/S0040-6090(98)00392-7
  35. 「アーク放電法におけるフラーレン生産性の最適Heガス圧力」
“Optimum He gas pressure on fullerene productivity in arc discharge method”
滝川浩史,河内優,今村雅則,榊原建樹
プラズマ応用科学,Vol.5, pp.29-35 (1997.12)
  34. “Synthesis of anatase TiO2 film by reactive vacuum arc deposition method”
H. Takikawa, T. Sasaoka, T. Sakakibara
Electrical Engineering in Japan, Vol.126, pp.12-20 (1999.2), doi:10.1002/(SICI)1520-6416(199903)126:4<12::AID-EEJ2>3.0.CO;2-7
  33. 「反応性真空アーク蒸着法によるアナターゼ型TiO2膜の生成」
“Synthesis of anatase TiO2 film by reactive vacuum arc deposition method”
滝川浩史,笹岡毅志,榊原建樹
電気学会論文誌,Vol.A-117, No.8, pp.866-872 (1997.8)
  32. “Influence of power supply on continuity of vacuum arc with Al cathode and N2 flow under medium vacuum”
H. Takikawa, K. Tanaka, T. Sakakibara
Electrical Engineering in Japan, Vol.128, 3, pp.9-15 (1999.6)
  31. 「中真空におけるAl陰極N2フロー真空アークの放電持続性に及ぼす電源の影響」
“Influence of power supply on continuity of vacuum arc with Al cathode and N2 flow under medium vacuum”
滝川浩史,田中邦泰,榊原建樹
電気学会論文誌,Vol.A-117,No.7, pp.660-664 (1997.7)
  30. 「アーク放電法によるフラーレン生成に及ぼす空気リークの影響」
“Influence of air leakage on productivity of fullerene in arc discharge method”
滝川浩史,古瀬博,榊原建樹
電気学会論文誌,Vol.A-117,pp.645-646 (1997.6)
  29. 「フラーレン生成用アークにおける温度と炭素蒸気混入率の半径方向分布計測」
“Measurement of temperature and carbon-vapor-mixture-ratio distributions in a carbon arc for fullerene production”
滝川浩史,松尾廣伸,飯嶋浩和,榊原建樹
プラズマ・核融合学会誌,Vol.73, pp.510-517 (1997.5)
  28. 「帯電水滴散布による線香煙の除去」
“Elimination of joss stick smoke by spraying charged water mist”
滝川浩史,小林一義
電気学会論文誌,Vol.A-117,pp.215-216 (1997.2)
  27. 「連続パルス電流アーク放電によるフラーレンの生成」
“Fullerene production by arc discharge with continuously pulsed current”
滝川浩史,河内優,松尾廣伸,今村雅則,榊原建樹
プラズマ応用科学,Vol.4,pp.23-27 (1996.12)
  26. “Fullerene production by carbon arc method in various gases”
H. Matsuo, I. Nakagawa, H. Takikawa, T. Sakakibara
Transactions of the Material Research Society of Japan, Vol.20, pp.412-415 (1996.12)
  25. 「窒化チタン膜生成用真空アーク蒸着装置における圧力変化と窒素固定量」
“Pressure change and N2 fixation in a vacuum arc deposition apparatus for producing TIN film”
滝川浩史,井上友喜,榊原建樹
電気学会論文誌,Vol.A-116, No.5, pp.424-429 (1996.5)
  24. 「圧力上昇に伴うグローからアークへの移行とアーク移行確率-圧力特性」
“Glow to arc transition accompanying pressure increase and transition probability -- pressure characteristics”
滝川浩史,宮野竜一,榊原建樹
電気学会論文誌,Vol.A-115, No.11. pp.1057-1061 (1995.11)
  23. 「中真空におけるグロー放電を介したアーク点弧方式」
“A method of arc ignition via glow discharge in medium vacuum”
滝川浩史,井上友喜,宮野竜一,榊原建樹
電気学会論文誌,Vol.A-115, No.4, pp.386-387 (1995.4)
  22. 「高温炭素蒸気からの放射スペクトルとフラーレン生成用炭素アークの温度」
“Radiation spectra from high temperature carbon vapor and temperature of carbon arc for producing fullerene”
松尾廣伸,滝川浩史,飯嶋浩和,榊原建樹
電気学会論文誌,Vol.A-114, pp.869-874 (1994.12)
  21. 「種々のプラスチックチューブ内に点弧された溶発アークの電界の強さと溶発ガス量」
“Electric field strengths of the arcs burning through various plastic tubes and their ablation gas volumes”
滝川浩史,大西隆二,榊原建樹
電気学会論文誌,Vol.A-114, pp.610-616 (1994.9)
  20. 「フラーレン生成用カーボンアークからの放射スペクトル」
“Radiation spectra from carbon arc for the production of fullerens”
滝川浩史,松尾廣伸,飯嶋浩和,榊原建樹
電気学会論文誌,Vol.A-114, pp.267-268 (1994.3)
  19. 「AlN膜生成用真空アーク蒸着装置における放電変動の抑制」
“Suppression of discharge fluctuation in vacuum arc deposition apparatus for producing AIN film”
滝川浩史,高松秀樹,榊原建樹,鈴木泰雄
電気学会論文誌,Vol.A-114, No.3, pp.217-222 (1994.3)
  18. 「低電流真空アークの陽極モードとプラズマパラメータ」
“Anode modes and plasma parameters of Low current vacuum arc”
滝川浩史,藤島友紀,榊原建樹
電気学会論文誌,Vol.A-114, No.2, pp.123-128 (1994.2)
  17. 「真空アーク蒸着装置における黒鉛陰極点の逆行速度」
“Retrograde motion velocity of graphite cathode spot in vacuum arc deposition apparatus”
宮野竜一,滝川浩史,榊原建樹,鈴木泰雄
電気学会論文誌, Vol.A-114, No.2, pp.117-122 (1994.2)
  16. 「ポリエチレンチューブ内溶発アークのコア領域およびシース領域のガス流速の算定」
“Estimation of gas flow velocities of core and sheath regions of ablation arc in polyethylene tube”
滝川浩史,榊原建樹
電気学会論文誌,Vol.A-113, pp.681-686 (1993.10)
  15. “Diamond-like carbon film produced by vacuum arc deposition technique and its surface appearance”
H. Takikawa, K. Taketomi, T. Sakakibara
Electrical Engineering in Japan, Vol.114, No.5, pp.24-30 (1994.8), doi:10.1002/eej.4391140504
  14. 「真空アーク蒸着法を用いたダイヤモンドライクカーボン膜の生成とその表面形状」
“Diamond-Like carbon film produced by vacuum arc deposition technique and its surface appearance”
滝川浩史,武富浩一,榊原建樹
電気学会論文誌,Vol.A-113, No.9, pp.654-659 (1993.9)
  13. 「低電流真空アーク放電の拡散アークモードからフットポイントモードへの移行 -窒素ガス圧の影響-」
“Transition from diffuse-arc mode to footpoint mode in low-current vacuum arc
-The influence of ambient N2 gas pressuer-“
滝川浩史,藤島友紀,榊原建樹
電気学会論文誌,Vol.A-113, No.6, pp.486-487 (1993.6)
  12. 「ポリエチレン分解高温ガスの全放射パワーの計算および計測」
“Calculation and measurement of total radiated power of thermally decomposed polyethylene vapor”
滝川浩史,軸丸晃年,榊原建樹
電気学会論文誌,Vol.B-113, pp.335-341 (1993.4)
  11. “Measurement of the radial temperature distribution in the central part of an arc burning through a polyethylene tube”
H. Takikawa, T. Sakakibara, M. Miyashita, T. Sakuta, Y. Kito
Electrical Engineering in Japan, Vol.113, 1 (1993.2), doi:10.1002/eej.4391130101
  10. 「ポリエチレンアークシース領域の流速計測」
“Measurement of the flow velocity of sheath region in an arc burning through a polyethylene tube”
滝川浩史,大西隆二,榊原建樹
電気学会論文誌,Vol.A-112, pp.849-854 (1992.10)
  9. 「ポリエチレンチューブを貫通するアーク陽光柱の中心付近温度分布の計測」
“Measurement of the radial temperature distribution at the central part of an arc burning through a polyethylene tube”
滝川浩史,榊原建樹,宮下真文,作田忠裕,鬼頭幸生
電気学会論文誌,Vol.A-112, pp.47-53 (1992.1)
  8. 「真空アーク蒸着法によって生成されたAlN膜の膜質」
“Properties of AIN film formed by vacuum arc deposition process”
滝川浩史,小切山正,榊原建樹
電気学会論文誌,Vol.A-111, No.12, pp.1042-1046 (1991.12)
  7. 「反応性真空アークプラズマ診断用加熱型プローブ」
“Emissive probe for diagnostics of reactive vacuum arc plasma”
滝川浩史,松尾廣伸,榊原建樹
電気学会論文誌,Vol.A-111, No.11, pp.1025-1026 (1991.11)
  6. “Radiative aspects of the ablation-stabilized arc in polyethylene tube”
H. Takikawa, T. Sakakibara
IEEE Transactions on Plasma Science, Vol.19, pp.879-884 (1991.10), doi:10.1109/27.108429
  5. 「C2帯頭スペクトルの総合放射係数を用いたポリエチレンアーク温度の計測」
“Measurement of radial temperature distribution of polyethylene arc column using integrated emission coefficient of C2 band head spectra”
滝川浩史,榊原建樹,宮下真文,作田忠裕, 鬼頭幸生
電気学会論文誌,Vol.A-111,pp.880-887 (1991.10)
  4. 「ポリエチレンチューブを貫通するアーク陽光柱から放射されるスペクトル」
“Spectra radiated from an arc burning through a polyethylene tube”
滝川浩史,榊原建樹,宮下真文,鬼頭幸生
電気学会論文誌,Vol.A-111,pp.245-246 (1991.3)
  3. “In-flight measurements of temperature and velocity of tungsten particle in an r.f. plasma”
H. Takikawa, M. I. Boulos
Proceedings of Japanese Symposium on Plasma Chemistry, Vol.3, pp.105-110 (1990.7)
  2. 「ポリエチレンチューブ内のアーク陽光柱の電界の強さと放射パワー」
“Electrical field strength and radiation power of the arc burning through a cylindrical polyethylene tube”
滝川浩史,榊原建樹,鬼頭幸生
電気学会論文誌,Vol.A-106,pp.588-594 (1986.12)
  1. 「有機ガスが混入したフリーバーニングアークの基礎特性」
“Fundamental characteristics of organic gas contaminated free burning arc”
滝川浩史,榊原建樹,鬼頭幸生
電気学会論文誌,Vol.A-105,pp.613-614 (1985.11)